RV Awnings

Product Parameters

RV Awning Product Description

Skeleton Material

• Frame: High-strength aluminum alloy skeleton

• Surface Treatment: Electrostatic spraying for enhanced durability

• Accessories: High-strength plastic accessories made from imported raw materials, offering superior weather resistance

Fabric

• Material: Imported 100% waterproof PVC outdoor special fabric

• Standard: Conforms to European environmental and safety standards

Operation Mode

• Manual/Electric Integrated System

  • Voltage: 12V

  • Motor Brand: Duya (The sole distributor of the top domestic brand for this product category)

Installation Precautions for RV Awning

1. Professional Installation Required
   Installation must be carried out by an experienced installer to ensure safety and proper setup.

2. Vehicle Structure Inspection
   Before installation, confirm that the installation area on the vehicle body has been structurally reinforced.

3. Marking Installation Points

   • Use a pen to measure and mark all installation points accurately.

   • When the RV awning is opened, its arms generate considerable torque.

   • To prevent deformation of the vehicle’s rear panel and ensure smooth retraction, mark the arm connection block positions carefully.

   • Ensure that all mounting brackets are evenly spaced and aligned on a horizontal line.

4. Drilling and Bracket Fixation

   • Double-check both the inside and outside of the vehicle for any obstructions.

   • Proceed to drill holes and secure the brackets in place.

   • Note: Do not overtighten screws during initial installation to allow for final adjustments. Tighten all screws securely after final alignment.

5. Mounting the Awning

   • Place the RV awning onto the mounting brackets.

   • Adjust as needed and firmly secure it in place.

   •